Road Infrastructure

RSE Enclosure Range

The RSE Enclosure Range is available as 2.5mm marine grade aluminium powdercoated T33 Smoke blue.

The enclosures are available with a hinged front door and fixed rear cover or alternatively with hinged front and rear doors. Third party accreditation has been undertaken at the NATA registered Queensland Government SIMTARS Test Station for degree of protection of IPX6.

Typical aplications for RSE Enclosures include:

  • Intelligent Transport Systems (ITS)
  • Traffic light control
  • Street lighting distribution
Type Approval

Powdercoated corrosion resistant 2.5 mm aluminium
Hinged door with fixed rear panel or hinged front and rear doors fitted with gas springs
100mm high frangible plinth
Natural passive ventilation (vented base and roof) – vermin proof
IPX6 NATA certified degree of protection
Vandal resistant flush door and locks 7. 2.5mm aluminium mounting panel. Fully adjustable (not shown)
Extruded aluminium hinges with stainless steel hinge pins
Internal hinged escutcheons for power distribution (not shown)
Optional double skin with thermal insulation (available to special order)
Roof sloped to rear for water run off
Document holder
Vertical mounting rails
Shelf load tested to 100kg

VicRoads Electrical Distribution Cabinets Type 1, 2 & 3
Part Number Height (mm) Width (mm) Depth (mm)
RSE 130704 1340 760 400

*Height exlcudes plinth and roof. Total Height = 1500mm.

No type approval

This content has been restricted to logged in users only. Please login to view this content.

Concrete Plinth

To suit ITCS and ITDS Enclosure ranges

This new plinth enables the enclosure to be fitted flat on the mounting surface without overhangs on the front and rear.

The flat mounting surface is 1200 mm wide x 650 mm deep with stainless steel threaded inserts as close to the enclosure side as possible. This ensures maximum stability when the enclosure is bolted down using the recommended fixing points.

Cable /conduct entry is provided through a 420 mm x 430 mm central cavity ensuring the maximum number of conduits can be fitted through the plinth.

Find out more detailed information