Logix Engineering Pty Ltd ITCS & ITDS enclosure range is manufactured from 2.5mm marine grade Aluminium and are powder coated T33 smoke blue as standard.
The enclosures are suitable for ITS application in all states of Australia. They are approved in Queensland and Victoria and have been deployed on major projects in these states as well as in New South Wales and South Australia.
Enclosures are available with natural ventilation, fan ventilation or with air conditioners or heat exchanges. Cooling options are all available in AC or DC voltages.
Extruded structural aluminium frame
Marine grade aluminium cladding
150mm plinth to enable easier cable access & glanding
3 gland plates with full access for cabling
Hinged side panels for improved installation
Vented to prevent condensation
Flush doors for vandal resistance
21 inch frame mounted panelboards
Separate panelboard for ITS & lighting distribution
Ample cable termination for large field cables
Gas springs on all doors
|Cabinet||Height (mm)||Width (mm)||Depth (mm)||Height 1 (mm)||Width 1 (mm)||Ru||Weight|
No type approval for this product
This new plinth enables the enclosure to be fitted flat on the mounting surface without overhangs on the front and rear.
The flat mounting surface is 1200 mm wide x 650 mm deep with stainless steel threaded inserts as close to the enclosure side as possible. This ensures maximum stability when the enclosure is bolted down using the recommended fixing points.
Cable /conduct entry is provided through a 420 mm x 430 mm central cavity ensuring the maximum number of conduits can be fitted through the plinth.