Road Infrastructure

Distribution Cabinet Type 3

Logix Engineering Pty Ltd VR Range of Distribution Cabinets have been developed to comply with the stringent requirements of VicRoads specification TCS 043-A-2014.

The Type 3 distribution cabinet is 3 phase 415 v 50Hz metered switchboard. The switchboard is divided into 2 sections road lighting and ITS distribution. Each section is separately metered and has separate main switches.


Type Approval

Cabinets are manufactured from 2.5mm Marine Grade Aluminium
Powder Coated T33 Smoke Blue
Doors are flush to the frame (Vandal resistant)
Doors have Gas Struts to hold in open position
Separate door on Type 1 Meter Panel
Door Operated Light in Type 1 Switchgear Cubicle
Maintenance GPOS Fitted
Door locks are either Padlockable Swing Handles or fitted with 1/2 Euro Cylinder Locks. Note VicRoads Security BiLock Cylinders not included
Doors are fitted with Stiffeners and with Drawing Schedule Holders
Meter Panels are Double Hinged Type
Cabinet Roof is slope to the rear to allow water run off

VicRoads Electrical Distribution Cabinets Type 1, 2 & 3
Description Part Number Height Width Depth
Distribution Cabinet Type 1 VR-EDC-T1 1630mm 850mm 350mm
Distribution Cabinet Type 2 VR-EDC-T2 1200mm 500mm 275mm
Distribution Cabinet Type 3 VR-EDC-T3 1630mm 850mm 350mm

No type

This content has been restricted to logged in users only. Please login to view this content.

Concrete Plinth

To suit ITCS and ITDS Enclosure ranges

This new plinth enables the enclosure to be fitted flat on the mounting surface without overhangs on the front and rear.

The flat mounting surface is 1200 mm wide x 650 mm deep with stainless steel threaded inserts as close to the enclosure side as possible. This ensures maximum stability when the enclosure is bolted down using the recommended fixing points.

Cable /conduct entry is provided through a 420 mm x 430 mm central cavity ensuring the maximum number of conduits can be fitted through the plinth.

Find out more detailed information